Online Submissions

Already have a Username/Password for Vietnam Journal of Marine Science and Technology?
Go to Login

Need a Username/Password?
Go to Registration

Registration and login are required to submit items online and to check the status of current submissions.


Author Guidelines


Vietnam Journal of Marine Science and Technology, ISSN (print): 1859-3097, is one of the major speciality journals in Vietnam, published quarterly by Vietnam Academy of Science and Technology. Vietnam Journal of Marine Science and Technology publishes the articles on the results of basic investigative research, applied research and development of new methods and technologies in research and investigation, brief information on conferences, seminars and related activities in Vietnam and abroad in the field of marine science and technology.


The submitted manuscript (in Vietnamese or English) must be in the electronic file that is written with Microsoft Word in Times New Roman font, font size 12 and line spacing 1.2; the figures should be clear with adequate caption; the figure size should not exceed 15×20 cm. The manuscript must be in A4 size, including abstract, tables, figures and references. It is compulsory to provide the names of author and co-authors, institution, contact details, phone number and email address in the manuscript. The manuscript should use legal and popular scientific terms and measurement units in Vietnam as well as worldwide.

The manuscript is divided clearly into sections which are numbered I, II,... The subsections are numbered 1.1, 1.2,... (then 1.1.1, 1.1.2,...). The manuscript must be presented in the following order: Title, Author names, Contact detail of all authors, Email address of all authors, Abstract, Introduction, Main Content, Conclusion, Acknowledgement, References, Appendix.

- Title: Brief and generalizing the content of the article. Avoiding abbreviations and formulas (if possible).

- Authors’ name and contact detail: Providing the full name of all authors, institution and email address of each author. The corresponding author should be indicated who will take over the task of responding to the reviewer and editing the manuscript after being accepted. The phone number and postal address of corresponding author must be provided. Changes in the manuscript can only be accepted if the request is sent by the corresponding author.

- Abstract: Clear and summarizing the objectives of the article. Providing basic information: research methodology and results of the article. Clarifying new contributions of the article compared to previously published works.

- Keywords: Providing at least 3 keywords. Avoiding generic and unspecified words.

- Conclusion: Summarizing the issues examined and the results obtained. Emphasizing the importance of new contributions in the article. If possible, proposing the directions to further study in the future.

- Appendix: If there is more than one appendix, it must be numbered I, II,.... Formulas, tables, figures in the Appendix must be numbered separately.

- Math formulas and symbols: Using Latin or Greek symbols. The formulas are numbered in the order (1), (2),...

- Figure: It should be noted that the symbols and other details must be in the appropriate size to avoid the illegibility when reducing the size of figure. The caption is shown below the figure. All the figures must be cited in the content and in the order Figure 1, Figure 2,... It should also be noted that the figures that show the territory of Vietnam must clearly indicate the Hoang Sa and Truong Sa archipelagos.

- Table: The caption will be presented above the table. All the tables must be fully cited in the content and in the order Table 1, Table 2,…

- References: It must be ensured that all the references are fully cited in the content and arranged in citation order, for example, [1], [2, 3], [3-5]. Documents that have not been published in electronic or printing form are not recommended to be included in References. The references that are in Vietnamese or in hieroglyphs and non-Roman scripts must be translated into English with the original language in parenthesis. The references must adhere to the formats as follows:


[2] Pham Xuan Duong, 2013. Modelling the current field at the Dong Bo River mouth (Nha Trang) under the impact of reclamation work. Proceedings of International Conference “East Vietnam Sea 2012”, Vol. 2, pp. 9-16. (in Vietnamese).

[3] Pham Xuan Duong, 2012. Study on the circulation in Binh Cang Bay - Nha Trang by using numerical model. PhD Thesis in Geography, Vietnam Institute of Meteorology, Hydrology and Environment, Hanoi. (in Vietnamese).

[4] Arakawa, A. and V. R. Lamb, 1977. Methods of computational physics (Vol. 17, pp. 174-265). Academic Press.

[5] Arakawa, A., and Lamb, V. R., 1977. Computational design of the basic dynamical processes of the UCLA general circulation model. Methods in computational physics, 17, 173-265.

[6] Mellor, G. L., and Blumberg, A. F., 1985. Modeling vertical and horizontal diffusivities with the sigma coordinate system. Monthly Weather Review, 113(8): 1379-1383.

[7] Durran, D. R., 1999. Numerical methods for wave equations in geophysical fluid dynamics (No. 32). Springer.

[8] Da Silva, A. M., Young-Molling, C. C., and Levitus, S., 1994. Atlas of Surface Marine Data 1994, Vol. 1-5. NOAA Atlas NESDIS, 6-10. U. S. Gov. Printing Office, Washington D.C.

[9] Marchesiello, P., McWilliams, J. C., and Shchepetkin, A., 2001. Open boundary conditions for long-term integration of regional oceanic models. Ocean modelling, 3(1): 1-20.


The manuscript submitted to Vietnam Journal of Marine Science and Technology must not have been published before. This manuscript has not been reviewed for publication in another journal. The publication must be approved by all authors. If accepted, it will not be published elsewhere in the same form, in English or in any other language (including electronic file which the author receives).


The manuscript submission to must be performed online completely through the homepage of the Journal. The Vietnam Journal of Marine Science and Technology author will be guided on the submission process step by step through the creation and upload of the manuscript.

The system will automatically allocate the ID to the original manuscript, which is used during the review and editing processes, as well as allocate the digital object identifier (DOI) to the article after publication. All the correspondence, notices of editors and author, along with the comments of reviewers will be archived on the system.


Each submitted manuscript is usually reviewed and evaluated by two independent reviewers. Review time is within 2 months. The review will be sent to the author by the editor; the author needs to revise and improve the manuscript before publication. The time limit for the author to revise the manuscript is within 3 months. The revised manuscript which is received after this time limit will be considered as a new manuscript and the review process will be performed from the beginning.


When there are comments of the reviewers, the author is requested to make the manuscript revision, accompanied by a reply to all comments of the reviewers. The author should highlight changes in the manuscript, so that the editor and reviewers can follow the revision.


After being accepted, the manuscript will be edited into the standard format of the Journal. The tasks of author in the manuscript editing are as follows:

- The author will be requested to recheck the manuscript before the editor prepares the proof of the article.

- The manuscript will be converted into PDF format. The author must recheck this proof to avoid any mistakes in the editing process.

- After the English proofreading is finished, the author must verify the prepress proof once again before receiving the final article.

Accordingly, the author should read the manuscript at least 3 times until the final article is completed. Authors will receive a printed copy by post after 20 days of electronic publication on the homepage of the Journal.


Accordingly, the author should read the manuscript at least 3 times until the final article is completed. Authors will receive a printed copy by post after 20 days of electronic publication on the homepage of the Journal.


DOI can be used to cite and link to electronic documents. DOI consists of unique serial numbers assigned to a published document.

DOI is guaranteed to be unchanged; therefore, it is an ideal means for citing references, for example, an article published in Vietnam Journal of Marine Science and Technology:

Contact details: Journal of Marine Science and Technology, A16 Building, 18 Hoang Quoc Viet Street, Cau Giay District, Hanoi. Phone number: +84 24 37917411; +84 966650696. E-mail address:; Website:


Submission Preparation Checklist

As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.

  1. The submission has not been previously published, nor is it before another journal for consideration (or an explanation has been provided in Comments to the Editor).
  2. The submission file is in OpenOffice, Microsoft Word, RTF, or WordPerfect document file format.
  3. Where available, URLs for the references have been provided.
  4. The text is single-spaced; uses a 12-point font; employs italics, rather than underlining (except with URL addresses); and all illustrations, figures, and tables are placed within the text at the appropriate points, rather than at the end.
  5. The text adheres to the stylistic and bibliographic requirements outlined in the Author Guidelines, which is found in About the Journal.
  6. If submitting to a peer-reviewed section of the journal, the instructions in Ensuring a Blind Review have been followed.

Privacy Statement

The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.