Chinh Thuy Nguyen, Hoang Thai, Mai Thi Tran


Using additives for polyoxymethylene/silica (POM/SiO2) nanocomposite system is one of suitable solutions to improve processbility, mechanical properties, especially, elongation at break of the material. In this paper, the effect of some additives on the processbility, mechanical properties and morphology of polyoxymethylene/silica (POM/SiO2) nanocomposite was investigated. Zinc stearate (under the commercial name ultraflow – UTF), ethylene-vinyl acetate copolymer (EVA), linear low density polyethylene (LLDPE) and polylactic acid grafted 5 wt.% of polyethylene glycol (PELA) were used as additives for the nanocomposites. The obtained results showed that the preparing process of the POM/SiO2 nanocomposite becam more easily in the presence of PELA, UTF and EVA, corresponding to a lower torque and mixing energy. The PELA caused decrease in the E-modulus or hardness and increase in elongation at break as well as tensile strength of the POM/SiO2 nanocomposites. The SEM images showed that POM and  nanosilica were less compatible in the  nanocomposite using EVA, LLDPE and UTF and they were more compatible with using PELA.


polyoxymethylene, nanosilica, processibility, additives, mechanical property

Full Text:



Alexis D., Herve L., François B., Arnaud T., Loïc Le P. - Effect of organoclays on the degradation of polyoxymethylene homopolymer during melt processing, Polymer Degradation and Stability 131 (2016) 122-131.

Karahaliou P.K., Kerasidou A.P., Georga S.N., Psarras G.C., Krontiras C.A., Karger-Kocsis J. - Dielectric relaxations in polyoxymethylene and in related nanocomposites: Identification and molecular dynamics, Polymer 55 (2014) 6819-6826.

Kinga P. - Thermooxidative degradation of polyoxymethylene homo- and copolymer nanocomposites with hydroxyapatite: Kinetic and thermoanalytical study, Thermochimica Acta 600 (2015) 7–19.

Lan-Hui S., Zhen-Guo Y., Xiao-Hui L. - Study on the friction and wear behavior of POM/Al2O3 nanocomposites, Wear 264 (2008) 693–700.

Sirirat W., Supakanok T., Akaraphol P., Chaturong E. - Effect of particle sizes of zinc oxide on mechanical, thermal and morphological properties of polyoxymethylene/

zinc oxide nanocomposites, Polymer Testing 27 (2008) 971–976.

Thontree K., Yasushi K., Toshikazu U., Daigo N., Wandee T., Yupin P., Suwabun C. - Role of primary amine in polyoxymethylene (POM)/bentonite nanocomposite formation, Polymer 49 (2008) 1676-1684.

Tomara G.N., Karahaliou P.K., Psarras G.C., Georga S.N., Krontiras C.A., Siengchin S., Karger-Kocsis J. - Dielectric relaxation mechanisms in polyoxymethylene/polyurethane/layered silicates hybrid nanocomposites, European Polymer Journal 95 (2017) 304–313.

Kinga P., Klaudia K., Tomasz M. M. - Polyoxymethylene-copolymer based composites with PEG-grafted hydroxyapatite with improved thermal stability, Thermochimica Acta 633 (2016) 98–107.

Hoang T., Chinh N.T., Tham D.Q., Thanh D.T.M, Truc T.A., Trang N.T.T., Giang N.V., Lam V.D. - Effect of EVAgMA compatibilizer on the structure and properties of ethylene vinyl acetate copolymer/silica nanocomposites, KGK Kautschuk Gummi Kunststoffe 6 (2012) 51-54.

Tham D. Q., Tuan V. M., Thanh D.T.M, Chinh N.T., Giang N.V., Trang N.T.T., Hang T.T.X., Huong H.T., Dung N.T.K., Hoang T. - Preparation and properties of EVA/silica nanocomposites in presence of EVA-g-acrylic acid, Journal of Nanoscience and Nanotechnology 15(4) (2015) 2777-84.

Cong D.V., Trang N.T.T., Giang N.V., Trung T.H., Chinh N.T., Huynh M.D., Hoang T., and Park J. S. - Preparation and characterization of nanocomposites based on poly(ethylene-co-vinyl acetate), polylactic acid, and TiO2 nanoparticles, Polymer(Korea) 40(3) (2016) 355-364.

Hoang T., Giang N.V., Tham D.Q., Chinh N.T. - Study on preparation of composite material based on HDPE-LLDPE and fly ash in melt state, Vietnam Journal of Science and Technology 48(5) (2010) 97-104.

Chinh N.T., Mai T.T., Trang N.T.T., Giang N.V., Trung T.H., Huong N.T.T., Hoang T. - Tensile, electrical properties and morphology of polyethylene/modified fly ash composites using ultraflow, Vietnam Journal of Chemistry 54(6) (2016) 776-780.

Chamil A., Adrian L. K., Javier V.S., Elaine C. B., Phil D. C., Jing D., Kang L., Eileen H.J., Mark P. - Process efficiency in polymer extrusion: Correlation between the energy demand and melt thermal stability, Applied Energy 135 (2014) 560–571.

Doagou-Rad S., Islam A., Jensen J. S. - Influence of processing conditions on the mechanical behavior of MWCNT reinforced thermoplastic nanocomposites, Procedia CIRP 66 (2017) 131 – 136.

Pierre E.L.M., Jean-Christophe Q., Laurent F., Jean-Charles B., Stéphane G., Anne B. - Modelling of PLA melt rheology and batch mixing energy balance, European Polymer Journal 60 (2014) 273–285.

Zhongyang L., Jing J., Shuangjun C., Jun Z. - Effect of crystal form and particle size of titanium dioxide on the photodegradation behaviour of ethylene-vinyl acetate copolymer/low density polyethylene composite, Polymer Degradation and Stability 96(1) (2011) 43-50.

DOI: https://doi.org/10.15625/2525-2518/56/3B/12711 Display counter: Abstract : 227 views. PDF : 219 views.


  • There are currently no refbacks.

budidaya tani

Index: Google Scholar; Crossref; VCGate; Asean Citation Index

Published by Vietnam Academy of Science and Technology