Investigation of AA5083 T-lap joint fabricated by friction stir welding

Phan Thanh Nhan, Tran Minh Khang, Tran Hung Tra

Abstract


Transportation industries are faced to big maters that the scientists focus on, such as energy saving and ecologically sustainable products. Therefore, many innovative solutions are delivered that will support environmental preservation but meet industries’ requirements for greater productivity and minimized operational costs. Aluminium alloys have successfully contributed to meeting the rising demand for lightweight structures. Recently, notable developments in aluminium welding techniques have resolved many welding related problems, although some problems need to be addressed. In this paper, 5083 aluminium alloy T-lap-joints were successfully fabricated by friction stir welding with various welding regimes. The defects morphology in the T-joints was experimentally observed and analyzed by a high magnification microscope. The roles of the grain microstructure and the effects of defects morphology in the mechanical behavior of the T-joint was investigated. In addition, the fracture locations and the fracture surface of the failure specimens were observed and discussed as well. Results indicate that the fracture of T-joints along the stringer is attributed to the bonding line defects, kissing bond defects and the tunnel defects. The result also shows, in the T-joints of 5083 aluminum alloy, the welding parameters influence significantly on the features and sizes of the defects.


Keywords


T-joint friction stir welding, defects morphology, microstructures, mechanical properties.

Full Text:

PDF

References


Dursun T., Soutis C. - Recent developments in advanced aircraft aluminium alloys. Materials and Design. 56 (2013) 862–871.

Paul K., Richard R., Jukka M., Raimo S. – Investigation of weld defects in friction-stir welding and fusion welding of aluminium alloys, International Journal of Mechanical and Materials, Spring Open Journal.

M. Gene - The welding of aluminium and its alloys, Woodhead Publishing Ltd, Cambridge.

ZY. Ma - “Friction Stir Processing Technology: A Review”, Metallurgical and Materials Transactions; 37A, (2008) 642-658.

R.S. Mishra - M.W. Mahoney editors, Friction Stir Welding and Processing, ASM International (2007).

D.D. Hao, M. Okazaki, T.H. Tra, Q.H. Nam - Defects Morphology in the Dissimilar Friction Stir Welded T-lap Joints of AA7075 and AA5083, Advances in Engineering Research and Application (2019) 210-216.

D.D. Hao, T.H Tra - Effects of friction stir welding parameters on the mechanical properties of AA7075-T6, Archives of Materials Science and Engineering/ International OCSCO World Press, 1897-2764. 77 (2) (2017) 58-64.

T.H Tra, M. Okazaki, K. Suzuki - Fatigue crack propagation behavior of friction stir welding AA 6063-T5: Residual stress and microstructure effect, International Journal of Fatigue, 0142-1123. 43 (2012) 23-29.

T.H. Tra - Effect of weld parameters on the mechanical properties of friction stir welding AA6063-T5, ASEAN Engineering Journal, 2229-127X. 4 (2011) 73-81.




DOI: https://doi.org/10.15625/2525-2518/57/4/13535 Display counter: Abstract : 146 views. PDF : 33 views.

Refbacks

  • There are currently no refbacks.


Index: Google Scholar; Crossref; VCGate; Asean Citation Index

Published by Vietnam Academy of Science and Technology