Tu Cong NGUYEN, Kiet Anh NGUYEN, Minh Nhat PHUNG, Dinh Xuan NGO, Tuan Anh LE, Tho Duc DO, Lan Anh Thi LUU, Lam Huu NGUYEN


Nanocomposites of graphene oxide (GO) and tungsten oxide (WO3) nanobricks are synthesized by co-dispersing graphene oxide and tungsten oxide nanobricks in bi-distilled water with different weight ratios (0.1, 0.3 and 0.5 wt.% of graphene oxide). The ammonia gas sensing properties of nanocomposites are studied at low temperatures range (50, 100 and 150 oC) with the static gas-testing system. The co-appearance and the strong interaction between graphene oxide and tungsten oxide in the nanocomposite are confirmed by Raman scattering analysis. The content of GO in nanocomposite strongly affects the resistance of nanocomposite-based sensors. When the working temperature increase from 50 oC to 150 oC, the response of sensors switches from the p-type (at 50 oC) to n-type (at 150 oC) behavior. At 150 oC, the nanocomposite-based sensors show the most stable ammonia gas sensing characteristics. The working resistance of the pristine WO3 sensor reduced from 1.35 MΩ to 90, 72 and 27 kΩ when compositing with 0.1, 0.3 and 0.5 wt.% GO at 150 oC, respectively. The 0.5 wt.% GO/WO3 -based sensor shows low response but with low working resistance, shorter response and recovery times (20 s and 280 s, respectively) which is promising for low power-consumption gas sensors. 


graphene oxide, tungsten oxide nanobricks, nanocomposite, low-resistance gas sesor, ammonia

Full Text:



A. K. Geim and K. S. Novoselov, “The rise of graphene,” Nat. Mater., vol. 6, pp. 183–191, 2007.

D. Chen, L. Tang, and J. Li, “Graphene-based materials in electrochemistry,” Chem. Soc. Rev., no. 8, pp. 3157–3180, 2010.

C. Tan, X. Huang, and H. Zhang, “Synthesis and applications of graphene-based noble metal nanostructures,” Mater. Today, vol. 16, no. 1–2, pp. 29–36, 2013.

A. Majeed, W. Ullah, A. Waheed, F. Nasreen, and A. Sharif, “Graphene-metal oxides / hydroxide nanocomposite materials : Fabrication advancements and supercapacitive performance,” J. Alloys Compd., vol. 671, pp. 1–10, 2016.

W. Hau Low, P. Sim Khiew, S. Shee Lim, C. Wee Siong, and E. Raphael Ezeigwe, “Recent development of mixed transition metal oxide and graphene / mixed transition metal oxide based hybrid nanostructures for advanced supercapacitors,” J. Alloys Compd., vol. 775, pp. 1324–1356, 2019.

Z. F. Huang, J. Song, L. Pan, X. Zhang, L. Wang, and J. J. Zou, “Tungsten oxides for photocatalysis, electrochemistry, and phototherapy,” Adv. Mater., vol. 27, no. 36, pp. 5309–5327, 2015.

M. Khan et al., “Graphene based metal and metal oxide nanocomposites: synthesis, properties and their applications,” J. Mater. Chem. A, vol. 3, pp. 18753–18808, 2015.

N. M. El-shafai, M. E. El-khouly, M. El-kemary, M. S. Ramadan, and M. S. Masoud, “Graphene oxide–metal oxide nanocomposites: fabrication, characterization and removal of cationic rhodamine B dye,” RSC Adv., vol. 8, pp. 13323–13332, 2018.

S. Gupta, S. Chatterjee, A. K. Ray, and A. K. Chakraborty, “Graphene – metal oxide nanohybrids for toxic gas sensor : A review,” Sensors Actuators B. Chem., vol. 221, no. 2, pp. 1170–1181, 2015.

S. Hossain, W. Chu, C. Sunyong, S. Ahn, and D. Chun, “Photocatalytic performance of few-layer Graphene/WO3 thin films prepared by a nano-particle deposition system,” Mater. Chem. Phys., vol. 226, no. January, pp. 141–150, 2019.

X. Chang, Q. Zhou, S. Sun, C. Shao, and Y. Lei, “Graphene-tungsten oxide nanocomposites with highly enhanced gas- sensing performance,” J. Alloys Compd., vol. 705, pp. 659–667, 2017.

W. Tian, X. Liu, and W. Yu, “Research progress of gas sensor based on graphene and its derivatives : a review,” Appl. Sci., vol. 8, p. 1118, 2018.

J. Zhang, X. Liu, G. Neri, and N. Pinna, “Nanostructured materials for room-temperature gas sensors,” Adv. Mater., vol. 28, pp. 795–831, 2016.

X. V. Le, T. L. A. Luu, H. L. Nguyen, and C. T. Nguyen, “Synergistic enhancement of ammonia gas-sensing properties at low temperature by compositing carbon nanotubes with tungsten oxide nanobricks,” Vacuum, vol. 168, no. July, p. 108861, 2019.

G. Korotcenkov, V. Brinzari, M. Ivanov, A. Cerneavschi, J. Rodriguez, and A. Cirera, “Structural stability of indium oxide films deposited by spray pyrolysis during thermal annealing,” Thin Solid Films, vol. 479, no. 1–2, pp. 38–51, 2005.

M. Righettoni, A. Amann, and S. E. Pratsinis, “Breath analysis by nanostructured metal oxides as chemo-resistive gas sensors,” Mater. Today, vol. 18, no. 3, pp. 163–171, 2015.

N. Van Duy, N. D. Hoa, N. T. Dat, D. T. T. Le, and N. Van Hieu, “Ammonia-gas-sensing characteristics of WO3/Carbon nanotubes nanocomposites: Effect of nanotube content and sensing mechanism,” Sci. Adv. Mater., vol. 8, no. 3, pp. 524–533, 2016.

X. V. Le et al., “Composition of CNT and WO3 nanoplate: synthesis and NH3 gas sensing characteristics at low temperature,” J. Met. Mater. Miner., vol. 29, no. 4, 2019.

H. Zheng, J. Z. Ou, M. S. Strano, R. B. Kaner, A. Mitchell, and K. Kalantar-Zadeh, “Nanostructured tungsten oxide - Properties, synthesis, and applications,” Adv. Funct. Mater., vol. 21, no. 12, pp. 2175–2196, 2011.

P. Dong, G. Hou, X. Xi, R. Shao, and F. Dong, “WO3-based photocatalysts: morphology control, activity enhancement and multifunctional applications,” Environ. Sci. Nano, vol. 4, pp. 539–557, 2017.

B. Paulchamy, G. Arthi, and L. Bd, “A simple approach to stepwise synthesis of graphene oxide nanomatrial,” Nanomedicine Nanotechnol., vol. 6, no. 1, pp. 2–5, 2015.

L. A. T. Luu et al., “Tailoring the tructure and morphology of WO3 nanostructures by hydrothermal method,” Vietnam J. Sci. Technol., vol. 56, no. 1A, pp. 127–134, 2018.

F. Hosseini, R. Rasuli, and V. Jafarian, “Immobilized WO3 nano-particles on graphene oxide as a photo-induced antibacterial agent against UV resistant Bacillus Pumilus,” J. Phys. D. Appl. Phys., vol. 51, p. 145403, 2018.

X. Hu, P. Xu, H. Gong, and G. Yin, “Synthesis and characterization of WO3/Graphene nanocomposites for enhanced photocatalytic activities by one-step in-situ hydrothermal reaction,” Materials (Basel)., vol. 11, p. 147, 2018.

J. E. Flores-Mena, J. Diaz-Reyes, and J. A. Balderas-Lopez, “Structural properties of WO3 dependent of the annealing temperature deposited by hot-filament metal oxide deposition,” Rev. Mex. Fis., vol. 58, pp. 504–509, 2012.

M. F. Daniel, B. Desbat, J. C. Lassegues, B. Gerand, and M. Figlarz, “Infrared and Raman study of WO3 tungsten trioxides and WO3, xH2O tungsten trioxide tydrates,” J. Solid State Chem., vol. 67, pp. 235–247, 1987.

M. S. Dresselhaus, A. Jorio, and R. Saito, “Characterizing graphene, graphite, and carbon nanotubes by Raman spectroscopy,” Annu. Rev. Condens. Matter Phys., vol. 1, no. 1, pp. 89–108, 2010.

G. Jeevitha, R. Abhinayaa, D. Mangalaraj, and N. Ponpandian, “Tungsten oxide-graphene oxide (WO3 -GO) nanocomposite as an efficient photocatalyst, antibacterial and anticancer agent,” J. Phys. Chem. Solids, vol. 116, no. December 2017, pp. 137–147, 2018.

L. Fu, T. Xia, Y. Zheng, J. Yang, A. Wang, and Z. Wang, “Preparation of WO 3 -reduced graphene oxide nanocomposites with enhanced photocatalytic property,” Ceram. Int., vol. 41, pp. 5903–5908, 2015.

M. B. Tahir, G. Nabi, and N. R. Khalid, “Enhanced photocatalytic performance of visible-light active graphene-WO3 nanostructures for hydrogen production,” Mater. Sci. Semicond. Process., vol. 84, no. May, pp. 36–41, 2018.

K. Ojha, O. Anjaneyulu, and A. K. Ganguli, “Graphene-based hybrid materials : synthetic approaches and properties,” Curr. Sci., vol. 107, no. 3, pp. 397–418, 2018.

P. T. Moseley, “Progress in the development of semiconducting metal oxide gas sensors: a review,” Meas. Sci. Technol., vol. 28, p. 82001, 2017.

A. S. Alshammari, M. R. Alenezi, K. T. Lai, and S. R. P. Silva, “Inkjet printing of polymer functionalized CNT gas sensor with enhanced sensing properties,” Mater. Lett., vol. 189, pp. 299–302, 2017.

DOI: Display counter: Abstract : 174 views. PDF : 48 views.


  • There are currently no refbacks.

budidaya tani

Index: Google Scholar; Crossref; VCGate; Asean Citation Index

Published by Vietnam Academy of Science and Technology